I have tried to pack as much function as possible into my little laundry room! So of coarse, I had to add some sort of drying rack. I don't know about you, but usually when I have items that must be air dried, they go on a towel on the kitchen table until dinner. Then the still damp item gets moved to the coffee table or where ever else until it dries. I pinned quite a few ideas, but in the end I chose to follow my friend Sandra's instructions over at Sawdust Girl. You can just go over and follow her instructions like I did. I only changed one thing. I really didn't think I would be able to line up my holes for the dowels, so here's what I did. I marked my holes on the side of one board and then I clamped a stop block on my drill press so I could make all the holes the same distance from the edge.
Last of all I clamped the left and right sides together and drilled through both boards. All holes were perfectly lined up!!!!
I then connected the mesh or netting, from a laundry bag, with thin strips of wood just like Sandra. I love how they turned out!!!
I also used different drawer glides than Sandra because I wanted mine to be easily removed. Once the racks were done and in place I made drawer fronts out of 1/2 inch MDF. My drawer glides have a lot of movement and I found my fronts were not all flush. I just marked how much was sticking out and sanded off the back of my drawer front until it fit flush. Hope that makes sense. Once everything fit right I added my 59 cent knobs I got at The NPS Store. I used dimes to space my drawer fronts as I installed them. I didn't want any rubbing between the fronts.
So excited to be able to dry items tucked away in my laundry room until they are completely dry!! Here's the tower with the clean clothes baskets and drying racks!! I'm so in love!!!
What do you think?
We are almost done with this laundry room.
(We added a fan to the back of the drying racks to help things dry faster, go here to see how we did that.)
Thanks for stopping by!!